If your Whirlpool washer is displaying the error code F22, it means that there is a problem with the water temperature sensor. This sensor is responsible for monitoring the water temperature inside the washer tub and sending a signal to the control board to let it know when the water is the correct temperature. If the sensor is not working properly, it can cause the washer to fill with either too much or too little water, which can lead to the F22 error code. To fix this problem, you will need to replace the water temperature sensor.

Whirlpool Washer Error Code F22 – What to Do?

If your Whirlpool washing machine is displaying the error code F22, it means that there is a problem with the water temperature sensor. This sensor is responsible for monitoring the water temperature inside the washing machine and sending signals to the control board to adjust the heating element accordingly.

If the water temperature sensor is defective, it can cause the washing machine to overheat the water, which can damage the clothing and cause the F22 error code to be displayed. To fix this problem, you will need to replace the water temperature sensor. 

1. Unplug the washing machine from the power outlet.

2. Remove the back panel of the washing machine to access the water temperature sensor.

3. Disconnect the water temperature sensor from the control board.

4. Remove the old water temperature sensor and install the new one in its place.

5. Reconnect the water temperature sensor to the control board.

6. Replace the back panel and plug the washing machine back in.

7. Run a test cycle to make sure that the error code is gone.

How to Fix Whirlpool Washer Error Code F22?

If your Whirlpool washer is displaying the error code F22, it means that the water temperature sensor is not working properly. This sensor is responsible for detecting the water temperature and sending a signal to the control board. If the sensor is not working, the control board will not be able to properly regulate the water temperature, which can cause the washer to overheat.

To fix this problem, you will need to replace the water temperature sensor. You can find the sensor located on the back of the washer, near the water inlet valve. Once you have located the sensor, simply unplug it and plug in the new one. 

If you are not comfortable replacing the sensor yourself, you can always call a professional. However, this is a relatively easy repair that most people should be able to do themselves.

What Causes Whirlpool Washer Error Code F22?

If your whirlpool washer is displaying the error code F22, it means that the water temperature is too high. This can be caused by a variety of things, such as a clogged water heater, a faulty thermostat, or a problem with the water inlet valve. If you’re not sure what’s causing the problem, you should call a repairman. 

There are a few things you can try to fix the problem yourself, however. First, make sure that the water inlet valve is turned on all the way. If it’s not, turn it clockwise until it is. Next, check the water heater to see if it’s clogged. If it is, you’ll need to clean it out. Finally, check the thermostat to see if it’s set properly. If it’s not, you’ll need to adjust it. 

If you’re still getting the error code F22, it’s best to call a repairman.